委托方：_________
地址：_________
邮码：_________
电话：_________
总代理方：_________
地址：_________
邮码：_________
电话：_________
第一条 总则
1.1 委托方与总代理方(被委托方)在平等、互利、自愿的原则上，经充分协商，达成总代理协议，共同信守。
2.2 委托人指定的总代理人系独家全权代表，委托人授权其代表可根据协议所列的条款和条件，与卖方洽谈欲引进的技术的价格及其他有关事项。
第二条 定义 本协议术语的意义如下：
2.1 “佣金”系按本协议所列的条款和条件由委托人按照6.1条款支付给总代理人的佣金。
2.2 “许可证协议”，指委托人与卖方所签订的技术转让或许可证协议，包括与技术有关的于任何时候所作的补充、修改和增补的技术，由卖方出售、转让该技术并向委托方予以报价。
2.3 “价格”系指委托人为引进该项技术而支付给卖方的款额。
第三条 总代理
3.1 委托人指定其总代理人，系为独家全权总代理，代表委托人与卖方洽谈引进该项技术应付的价款及有关许可证协议的条款和条件，并代表委托人联系有关事项。总代理人愿意接受此委托。
3.2 在协议有效期内，委托人不得指定其他任何人为其代理人洽谈引进该项技术的价格及有关许可证协议的条款和条件，或代表委托人联系有关任何事项。
3.3 根据协议，总代理人作为委托的独家全权代理，代表委托人洽谈本许可证的协议为引进该项目，为此，一旦成交，予以承认并生效。委托人与卖方洽谈该项技术的价格及其他条款和条件，经谈妥各方当事人正式签署许可证协议及总代理取得佣金，其总代理终止。
3.4 本协议的委托人与总代理人不因委托代理成合股关系，亦不因此获得本协议指定范围外的代理权。
第四条 总代理人的职责
4.1 必须努力与卖方洽谈，向卖方取得最好的价格及最优惠的条款和条件，便于委托人获得该项技术的转让并尽速签订许可证协议。
4.2 在洽谈转让及引进该项技术的过程中，总代理人与卖方洽谈中若出现任何争议、分歧或僵局，应立刻向委托人提供有关详情，并就此事与委托人磋商。
4.3 应采取确实有效的办法为委托人取得该项技术并签订许可证协议。
4.4 在本协议有效期内，未经委托人书面同意，总代理人不得：
(1)除委托人指定的全权代理有关事项外，不得自命为委托人代理任何事项;
(2)以委托人的名义允诺或解决事宜，以委托人的信用作担保，代表委托人作出任何保证或陈述，或使委托人承担任何责任或业务;
(3)与卖方议定转让或获得该项技术的价格及有关条款和条件;
(4)不论以任何方式从委托人处获得的信息资料，皆属秘密，仅能为引进技术用，不得泄露。
第五条 委托人的职责
5.1 代理人当代表其委托人与卖方商定价格、条款和条件时，或将转让技术的价格条款和条件书就许可证协议时，或就有关问题提出要求时，委托人须立即向总代理人给予指示。
5.2 委托人应及时满足代理人的要求，向总代理人提供有关业务所需的信息，便于总代理人与卖方洽商转让和获得该项技术。
第六条 佣金
6.1 委托人同意支付给总代理人价格总金额的百分之_________(_________%)的佣金。佣金于许可证签署之日以_________支付。届时不得以任何借口延迟，应即时支付。
第七条 终止协议
7.1 如遇有下列任何条件或情况时，委托人须以书面方式通知总代理人：按协议规定总代理人不履行或不遵守其职责或义务时，或当收到委托人就总代理人不履行或不遵守其职责的通知后的30天内，仍置之不理，则立刻终止本协议对代理人的委托。
7.2 按照本协议规定期满或终止对总代理人的委托，不论出于何种原因，均不妨碍协议各方面的权利和义务。
7.3 当届满和终止对总代理人的委托时，按下述条款办理：
(1)总代理人应立即将持有与委托人业务有关的票据、备忘录、记录稿件或其他文件交还给委托人。
(2)按照本协议规定，于终止对总代理人委托的5天内，委托人将佣金(按6.1条规定应支付尚未付清部份的佣金)支付给代理人。
7.4 按本协议规定不论出于何处原因届满或终止对总代理人的委托，本协议仍然予以履行或遵守其条款，对各方均有约束力并付之实施。
第八条 分代理或转让
8.1 非经委托人书面同意，总代理人不得将协议之任何义务或责任转让给非经委托人指定的分代理，不论经委托人如何同意的由总代理人委托的分代理，根据协议的规定不得免除代理人的任何权利、义务或责任。
8.2 非经总代理人书面授权，委托人不得将本协议规定的任何权利、义务或责任予以转让或转移给他人。
8.3 本协议对委托人、总代理人及各方指定的继承人均具有同等的约束力，并确保实施。
第九条 修改
委托人与总代理人签订的引进技术协议书，包括整个协议书和备忘录，立即取代委托人与总代理人对该项技术以往的全部协议和安排，后者自本协议签署之日起，即告终止。除非经本协议当事人签署的书面通知，否则本协议不得作任何修改和变更。
第十条 法律适用
本协议根据签字时_________国现行的有关法律、法令和条例制订。然而，在协议生效后，由于_________国颁布了新的法律、法令、条例，或对原有的法律、法令和条例进行了修改，致使委托人和总代理人中任何一方的经济利益发生重大的变化，应及时协商，并对本协议的有关条款作必要的修正和调整，以维护委托人和总代理人在协议中的正常的经济权益。
第十一条 争议的解决
11.1 在执行本协议中所发生的或与本协议有关的一切争执，首先应由委托人和总代理人友好协商解决。
11.2 若协商不能解决，在_________国仲裁委员会根据该委仲裁程序仲裁。
11.3 仲裁裁决是终局的，对委托人和总代理人都有约束力，仲裁费由败诉方负担。
第十二条 语言
本协议以英文和中文书写，两种文字均为正式文本，具有同等法律效力。
第十三条 通知
凡有关本协议的通知、请求或其他通讯往来，须以文字为准，可采用书信、电传、电报方式按对方地址寄发对方。
本协议于_________年_________月_________日在_________签署。
委托人(盖章)：_________ 总代理人(盖章)：_________
代表(签字)：_________ 代表(签字)：_________
职务：_________ 职务：_________
合同号：______签约地点：____________________日期： _________
甲方：________地址：__________电话：__________传真____________
乙方：________地址：__________电话：__________传真____________
根据平等互利原则， __________有限公司与_________有限公司友好协商特约签定本合同
一、双方承诺：由乙方提供不作价设备__________美元(港币)给甲方用于加工生产__________之用，(详见设备清单)。产权归乙方所有。使用期限为年，在监管期限内，不得擅自在境内销售、串换、转让、抵押或者移作他用。到期后如不续签，则由甲方协助乙方申报海关核准后处理。乙方以免费方式提供设备，不需甲方办理付汇进口，也不需用加工费或差价偿还设备款。
二、甲方向乙方购买原料、辅料
商品品名及规格__________原料__________ 辅料__________
单位数量单价金额品名单位数量单价金额
合计__________
三、甲方供乙方制成品的数量及金额
商品编码品名及规格单位数量单价金额
合计__________
四、乙方供料于____________________ 起运抵 _______________
甲方制成品于_________________ 日前运往______________
五、运输方式及运费用__________
六、保险费负担
七、付款方式__________
八、包装要求
九、仲裁：因执行本合同所发生的争议或与本合同有关的一切争议，双方应通过友好协商解决，如果协商不能解决，应提交中国国际贸易促进委员会根据该会仲裁程序进行仲裁，仲裁裁决为最终裁决，对双方都有约束力。
十、本合同一式八分，由签字双方各执一分，其余六分报送有关部门备案。
甲方(盖章) 乙方(盖章)
本合同于_________年_________月_________日在中国_________签订。
甲方为：中国_________公司
法定地址：_________
电话：_________
电传：_________
乙方为：_________国公司
法定地址：_________
电话：_________
电传：_________
第一条 贸易内容
(一)乙方向甲方提供用于生产的_________型机械_________台，以及各种其他辅助机械设备，并同时提供各类机械设备所必需的附配件及备用件，以及在生产过程中各种必需的测试仪器。具体的各类机械设备、测试仪器、附、配件、备用件之型号、名称、规格、数量、价格、包装要求、交货期限等，由双方另行签订设备进口合同，作为本合同不可分割的一部分。
(二)甲方用乙方提供的机械设备所生产的部分产品以及其他商品，或经双方协商，用_________工厂生产的_________商品来偿付全部机械设备的价款。具体的偿付商品的名称、数量、价格、交货期限等，由双方另行签订补偿商品供货合同，作为本合同不可分割的一部分。设备进口合同与补偿商品供货合同可合并为补偿贸易购销合同(见附件)。
第二条 支付条件与方式
由甲乙双方对开信用证，即由甲方分期开出以乙方为受益人的远期信用证，分期、分批支付全部机械设备的价款;乙方开出以甲方为受益人的即期信用证，支付补偿商品的货款。甲方用乙方支付补偿商品的货款，来支付全部机械设备的价款。当乙方支付的货款不能相抵甲方所开的远期信用证之金额时，其差额部分由乙方用预付货款方式，在甲方所开的远期信用证到期前汇付甲方，以使甲方能按时议付所开的远期信用证。甲方所开的远期信用证的按期付款，是基于乙方按规定开出限期信用证及按规定预付货款。乙方保证按规定开出信用证及预付货款。
第三条 偿付期限
甲方用_________年零_________个月，分月和商品偿付全部机械设备的价款。偿还日期自第一批机械设备到货后约_________个月后开始，原则上每月偿还的金额是全部机械设备价款的_________分之_________。甲方可以提前偿还，但需在_________个月前通知乙方。
在甲方用补偿商品偿还机械设备价款期间，乙方应按本协议项下的有关补偿商品合同的规定，开出以甲方为受益人的足额、限期、不可撤销，可分割、可转让的信用证。
第四条 计价货币和作价标准
双方商品均用_________币计价。乙方提供的全部机械设备及所有仪器、附配件用_________币作价，甲方提供的补偿商品则按签订合同时甲方出口货物的人民币基价，以当时的人民币对_________币的汇率折算为_________币。
第五条 利息计算
甲方所开的远期信用证及乙方所预付货款的利息应由甲方负担。双方议定年利息为百分之_________。
第六条 技术服务
货物到达甲方口岸后，由甲方自行安装，但在主要设备安装过程中，甲方认为需要时，乙方必须派出技术人员进行现场指导，提供必要的技术服务，在此过程中由于技术上的问题，所造成的损失由乙方负责。
经双方协调，为完成此项工作，由乙方派出_________数量的技术人员。在中国的一切费用均由乙方承担。
第七条 附加设备
在执行在协议过程中，如发现本合同项下的机械设备在配套生产时需要继续增添新的机械设备或测试仪器时，可由双方另行协调，予以增订。增订的项目仍应列入本合同范围之内。
第八条 保险
设备进口以后由乙方投保。设备所有权在付清货款后发生转移，之后，如发生意外，损失先由保险公司向投保人赔付，再按比例退回甲方已支付的设备货款。
第九条 违约责任
乙方不按合同规定购买补偿商品或甲方不按合同规定提供商品时，均应按合同条款承担违约责任，赔偿由此造成的经济损失，并向对方支付该项货款总值的_________%的罚款。
第十条 履约保证
为保证合同条款的有效履行，双方分别向对方提供由各自一方银行出具的保函，予以担保。甲方的担保银行为中国银行_________分行，乙方的担保银行为_________国_________银行。
第十一条 合同条款的变更
本合同内容如遇特殊情况需要变更，须经双方协商一致。
第十二条 不可抗力
由于人力不可抗拒的原因，致使一方或双方不能履行合同有关条款，应及时向对方通报情况，在取得合法机关的有效证明之后，允许延期履行或不履行有关合同义务，并可根据情况部分或全部免除违约责任。
第十三条 仲裁
凡是有关本协议或执行本协议而发生的一切争议，应通过友好协商解决。如不能解决，则应提交_________国_________仲裁委员会按_________仲裁程序在_________进行仲裁。仲裁适用法律为_________国法律。该仲裁委员会作出的裁决是最终的，甲乙双方均受其约束，任何一方不得向法院或其它机关申请变更。仲裁费用由败诉一方负担。
第十四条 文字、生效
本合同用中、_________两种文字写成，两种文字具有同等效力。
本合同自签字之日起生效，有效期为_________年。期满后，双方如愿意继续合作，经向中国政府有关部门申请，获得批准后，可延期_________年或重新签订合同。
甲方(签字)：_________ 乙方(签字)：_________
_________年____月____日 _________年____月____日
签订地点：_________ 签订地点：_________
附件
party a: _________company， china.
address:_________
tel: _________
telex: _________
party b: _________ company
address: _________
tel: _________
telex: _________
article 1 introduction
(1)party b shall provide party a with _________machines of model _________to be used in production.along with them shall also be provided various kinds of supporting machinery，accessories and spare parts it needs，and the various kinds of measuring and testing instruments required in the course of production，the specific models， names，specifications， quantity，unit prices，packing requirements and the deadline for delivery shall be specified in an additional contract to be made between the both parties，which will serve as a integral part of the contract.
(2)the total cost of the entire machinery and its supporting equipment shall be paid to party b of the part of the products and/or other commodities produced by party a with the machinery supplied by party b.it may also be paid to party b of (a certain product)turned ort by .(this practice is hereinafter referred to as a make-up payment).the specific names，quantity and unit price of the products to be delivered as make-up payment，and the deadline for delinery，are to be specified in an additional contract between the two parties on products-supplying as make - up payment，which shall be the integral part of the contract.the two additional contracts mentioned above may be merged as one called buy - and sell contract on compensation trade.
article 2 terma of payment
the two parties shall open a l/c in favour of each other.i.e.party a shall open，at regular intervals，long-term l/c in favour of party b to pay in install ments the entire cost of the machinery and its support sight l/c in favour of {arty a as a payment for the cost of the products to be delivered by party a.party a shall pay for the total cost of the machinery and its supporting equipment with the sum of money which party b shall pay the products to be delivered by party a as a make - up payment.in case the money to be paid by pairy b is not enough to cover the value of the long - term l/c is determined by the at - siggt l/c opened by party b and its down payment as stipulated in the contract .party b grarantees to fulfil what is required of it to do as mentioned herein.
article 3 deadline for payment
party a shall pay the total cost of the machinery and its supporting equipment supplied by party b by delivering the products it produces to party b as a make - rp payment on a month - to - month basis ， and pay is off within a preriod of _________ years and _________months.the payment shall start approximately _________ months after the first delivery of the machinery is made .in principle，the sum to be paid per month shall be _________ percent of the total amount due to be paid for the machinery party a can make its payment ahead of schedule with a notice given to party b _________ months in advance.during the compensation period ，party b shall open a l/c in favour of party b，covering the total amount ， at sight ， irrevocable ， divisible and assignable ，in accordance with the relevant provisions in the buy - and - sell contract on compensation trade.
article 4 currency for pricing
products provided by either party shall be priced in terms of_________.all the items supplied by party b，including machinery ，the required apparatus，accessories and spare parts shall be priced directly in terms of _________ above mentioned ;while the products provided by party a as a make - up payment for the machinery supplied by party b shall be first priced in terms of rmb as orher similar exports at the time the contract is made and then the prices in rmb shall be turned into those in _________ above mentioned according to the current exchange rate at the time.
article 5 interest rate
party a shall pay the interest on its long - term l/c and the down payment of party b.the annual interest rate is agreed upon at _________%.
article 6 technical service
after arrival at the destination port，the machinery shall be assembled by party a.when party a believes it is necessary ，party b shall send its technicians to provide on-the-spot instructions and other required technical assistance during the course of assembling. party b shall be liable for the losses incurred in the coures fo assembling as a result of technical default of its prat.
after approval by both parties， party b shall send a group of technicians to china to faciliate the completion of the project. the cost incurred in china shall be borne by party b.
article 7 additional equipment
in the course of implementing the contract if it is foun necessary that ，in addition to the machinery and accessories already listed in the provisions， some additional items of the equipment and measuring and testing apparatus are needed， an additional order shall be agreed upon through negotiation .the items thus added shall be incorporated in the contract.
article 8 insurance
after being delivered in china， the machinery and its supporting equipment shall be insured by party b. the unforeseen losses in connection with the equipment shall be indemnified for by the insurance company first to the insurer (party b) in case the equepment has already been paid off for and thus transferred into party a's possession.then a proportional part of the sum paid by the insurance company shall be allotted to party a to cover the payment party a has already made for the items of equipment involved the losses.
article 9 liability for breach
either party shall be liable for a breach of contract in accordance with the provisions in the contract and shall indemnify for all the losses thus if party b should fail to make purchase of the products to be delivered by party a as make - up payment ， or party a should fail to deliver the products for compensation . in such case， the breaching party shall pay to the other a sum as a fine ， which shall account for _________ % of the total cost the products in question.
article 10 performance guarantee
to guarantee the implementation of the contract， each party shall submit to the other a performance guarantee issued by a bank agreed by both parties. the guarantee bank of party a is bank of china， while that of party b is _________ bank.
article 11 amendment of the contract
when the contract needs to be amended in certain particular cases， the amendment can be effected only after it is agreed upon by both parties through consultation.
article 12 force majeure
either party shall not be held resposible for failure or delay to perform all or any part of the contract due to flood， fire earthquake ， drought ， war or any other events which coule not be predicted at the time of the conclusion of the contract， and could not be controlled， avoided or overcome by the parties. however，the party effected by the event of force majeure shall inform the other party of its occurrence in written as soon as possible and thereafter send a certificate of the event issued by the relevant authority to the other party but no later than 15days after its occurrence.
in the event of force majeure last over 120 days， both parties shall negotiate the performance or the termination of the contract.
article 13 arbitration
all disputes arising from the performance of this contract should be settled through friendly negotiations. should no settlement be reached through engotiation， the case shall then be submitted for arbitration to the china international economic and trade arbitration commission(beijing) and the rules of this commission shall be applied. the arbitration fee shall be borne by the losing party unless otherwise awarded by the arbitration organization.
in the event of force majeure last over 120 days， both parties shall negotiate the performance or the termination of the contract.
during the course of the arbitration， the contract shall be performed except for the part under arbitration.
article 14 language and effective date
the contract shall be written in chinese and in english. both languages are equally authentic. in the events of any discrepancy between the two abovementioned versions，the chinese version shall prevail.
the contract shall become effective when the contract is signed by both parties. the effective period of the contract shall be years. based on the willingness to continue the contract， both parties shall submit a application to relavant department of chinese government for the extension of the contract or reach a new contract when the contract expires.
partya(signature) : _________ partyb(signature) : _________
date:_________ date:_________
因篇幅问题不能全部显示，请点此查看更多更全内容